Introduction:
We’ve probably all picked up a table tennis bat at some stage in our
lives, either in the garage, at school or at work. There’s always a few
over-enthusiastic characters out there that play just to win, and make fun of
those they beat. Well if you’ve been on the receiving end of this ‘abuse’,
this guide may be just for you. This guide is for those casual players, that
have acquired some basic skills in table tennis, can generate a little spin on
the ball, but don’t take it seriously enough to play competition at clubs. It
takes advantage of two very different rubbers that you can put on either side
your bat, which very few casual players understand.
The Basics:
The key to making this strategy work is spin and deception, with your
opponent not knowing what type of spin is on the ball. This usually results in
your opponent missing the ball completely, or hitting it in the net or over the
table.
The basic equipment you need for this strategy is a bat
with 2 totally contrasting rubbers on either side, one a very tacky (sticky) and
spinny rubber (such as most Chinese rubbers) and one ‘long pimple’ rubber.
The spinny rubber is obviously very good for generating spin, whereas the long
pimple rubber is unique in that it returns most your opponent’s spin back to
him. These types of rubbers can be picked up fairly cheap at quite a few online
shops, such as One of a Kind Trading
. A few recommendations are given at the end of this article. The blade (the bat
without the rubbers) is not very important for this strategy to be successful,
as most of the work is done by the rubbers. So if you don’t already have a
blade, you can buy a cheap one from the same shop, and they’ll normally put it
together for you free of charge.
Technically you need one red and one black rubber on either
side of the bat. However this is really only a requirement for competition, so
if you only play casually this is not necessary. To be totally ruthless and make
it even harder for your opponent, you can have the same colour rubber on both
sides, so that he cannot judge which one you’re hitting with. Because the spin
coming off the two different rubber is so different, hitting the ball with one
side followed by a hit from the other side will produce very different results,
leaving your opponent totally confused. However most casual players don’t even
look at what side you hit with, so it may not be as great an advantage.
Putting it into practice:
Ok, so you’ve got your new ‘evil’ weapon… what strategy do you use
to make the most of it? Well there’s two part to this (1) when you serve (2)
when your receive:
1. When you serve:
Put as much backspin and/or sidespin on the ball with your tacky rubber by
brushing the ball with a forward action underneath (and sideways for sidespin).
With these rubbers this is much easier to do, but will still take a little
practice. This will probably win you quite a few points outright, but some will
come back. When it comes back, it will invariably have significant spin coming
back, either your own, or spin that your opponent imparts. Hit the next shot
with the long pimple rubber, don’t hit it hard or try to attack it, but try to
keep it low as possible but make sure it’s on the table. The long pimple
rubber will actually reverse the spin that’s coming towards you, which will
produce very unpredictable bounches and balls. Chances are high that your
opponent will miss the ball, or pop it up high so that you can put the next one
away… so be ready. If he returns it, continue the rally by either spinning the
ball with your tacky rubber, or gently returning it with your pimple rubber.
If you find your opponent is good enough to get used to
your spinny serves, and adjust for it, do a similar looking serve with your long
pimple rubber, and enjoy the results… Your opponent will adjust for spin
that’s not there, and this will force errors or easy balls to put away.
2. When you receive:
If your opponent uses a lot of spin in his serves, try and return them all with
the long pimple rubber. This will return most of his own spin back to him, and
will get himself into trouble. If he serves with very little spin, try and
return it with your spinny rubber if you can. If he returns this, some spin will
be returned back to you, so you hit the next one with your long pimple rubber,
and try and force another error.
Conclusion:
Now I’m not saying this is going to be really easy, as it will take you a
little time to learn how to use the rubbers, and adjust to them. It would be
best to have some practice with the bat against some other players to adjust to
them, before you embark on your mission of ‘destroying the bullies’. Note
that attacking with the long pimple rubbers is not recommended, as these
technique as more advanced, but for blocking and chopping they are fairly easy
to use at any level.
This type of bat and strategy IS actually used in high
level competition, and are even used by a few of the top players in the world.
At the higher levels however, it takes a great deal of skill and practice to be
effective, and these simple strategies covered here simply won't work. This
style of play does add another exiting aspect to the game, and can be a lot of fun at any
level. There are numerous different types of rubbers, and blades, all having
some different characteristics and requiring some different strategies. There is
a lot more to these types of bats than what’s covered here, and a lot more
strategies that can be employed. If you’ve enjoyed this guide, or wish to read
more about other rubbers or strategies, you might find this table tennis forum
very useful:
Rubber and blade Options:
Long pimple rubbers:
Friendship 755 OX, Friendship 837 OX, Dawei 388D-1 OX, Milkyway 955 OX
Inverted (spinny) rubber:
729 FX, 729, Globe 999, Globe Magicwand
Blade (if required):
Galaxy 961, Galaxy 896, Dawei Kama, LKT Instinct, Globe whirl wind 582
Written by Alex from One of a kind trading
|